|
Product Details:
Payment & Shipping Terms:
|
Pipe Material: | Carbon Steel | Voltage: | 380V/220V |
---|---|---|---|
Weight: | About 10 Tons | Dimension(l*w*h): | 40m*3m*2m |
Power(w): | 300 | Pipe Shape: | Round,square |
Pipe Diameter: | 16-76mm | Thickness: | 0.7-2.5mm |
High Light: | erw tube mill,slitting line machine |
The HG60 mill is intended for manufacturing of round pipe of Φ22mm-Φ76mm thickness is 0.8-3.5mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
ERW Pipe making machine Technical Process:
SteelTape →→ Un-coiler →→ Strip-head Cutter and welder →→Spiral accumulator →→ Forming section(Flattening unit +Main driving unit+Forming unit +Guide unit +High frequency induction welding unit +squeeze roller) →→ De-burr frame →→Cooling unit →→ Sizing unit and straightener →→ Flying saw under computer-control →→ Run-out table
Machine composion:
No. | Name of the production line part | Qty |
1 | Double-head uncoiler | 1 |
2 | Accumulator (Cage loop or horizontal spiral) | 1 |
3 | Flattening | 1 |
4 | Deburr frame | 1 |
5 | Horizontal roller | 13 |
6 | Speed testing wheel | 1 |
7 | Computer-controlled flying saw | 1 |
8 | Run out table | 1 |
9 | Vertical roller | 15 |
10 | Turk's head | 1 |
11 | Transmission box | 1 |
12 | Main driving spindle | 7 |
13 | High-frequency induction welding machine | 1 |
Contact Person: Mr. Yan
Fax: 86-0311-8302-5332